Drill or cut out your core holes for the cables to pass through. In a brick wall I suggest drilling smaller holes around the diameter of your hole (maybe 6) and then punching out the remaining centre brick piece with a hammer and chisel. You can use wall plates (like for power points) to finish it off or those desktop grommets like on computer desks.
If you mount the TV low enough, usually you won’t have a noggin between the top and bottom cable holes. If there is a noggin blocking cables from being fed from one hole to the next, you have two options;
i) buy 4 drill bit extenders, attach a 20mm speed bore, remove some roof tiles and drill a hole through the top plate, then through any noggins until you get through the offending noggin; or
ii) using a jigsaw, cut a notch out of the noggin - don’t go too deep. This will mean you will now have a hole to patch up, but it’s a lot easier than option (i). The patch is still usually behind the TV and so will be covered up.
Feed your cables through the holes and attach to the back of the TV. I use yellow tongue (it’s the yellow plastic joining strip between two chipboard flooring panels) to assist by taping the cables to one end and feeding the yellow tongue through first.
Whilst you’re at it, I suggest you also feed through a pull string at least three times the length of the distance between the holes, so you can pull any future cables through by attaching to the string. It’s also not a bad idea to add an extra cable(s) if you know you will be adding gear in the near future. Much easier now than once the TV’s in the way.
Now mount your TV, connect the other ends of the cables to your AV gear and your away. If your TV is not quite level, you can use some cardboard or the like to prop one end up slightly.
1 If you are renting and don’t want to cut holes in the wall, Vogels have some mounts with integrated cable management between TV and Entertainment Unit shelves, or you can use cable conduits (square tubing with a removable lid) available from Hardware stores or Electrical suppliers (eg Turks, etc)
Are you tired of the cluttered look of your entertainment center? Do you wish to optimize your viewing experience and create a sleek, modern look in your living space? TV wall mount installation might just be the perfect solution for you.
Mounting your TV on the wall not only saves valuable floor space but also provides a better viewing angle and enhances the overall aesthetics of your room. In this comprehensive guide, we will walk you through the process of TV wall mount installation, covering everything from choosing the right mount to the installation steps.
If you’re located in Naples or Ft. Myers, Florida and require professional assistance, contact Gulf Coast Installs at (239)-682-1077 to ensure a flawless installation by our TV installation specialists.
When it comes to TV wall mount installation, the first crucial step is choosing the right mount for your specific needs. There are several factors to consider, including TV size, weight, and the type of mount you prefer.
Fixed Mounts: Ideal for rooms with a fixed viewing area, fixed mounts provide a low-profile installation that keeps your TV close to the wall. They offer a sleek and discreet look but lack the ability to adjust the viewing angle.
Tilt Mounts: Tilt mounts allow you to adjust the vertical viewing angle, making them perfect for installations where the TV needs to be mounted above eye level. With tilt mounts, you can achieve optimal viewing while minimizing glare from windows or lighting fixtures.
Full-Motion Mounts: If you require maximum flexibility in adjusting the TV’s position, full-motion mounts are the way to go. These mounts allow you to swivel, tilt, and extend your TV, ensuring a perfect viewing angle from anywhere in the room. However, keep in mind that full-motion mounts generally require more space and can be more expensive.
Now that you have selected the perfect TV mount for your needs, it’s time to dive into the installation process. While it is possible to install a TV wall mount yourself, it is recommended to hire a professional for a safe and hassle-free experience.
Before starting the installation, gather the necessary tools, including a stud finder, level, drill, screwdriver, and measuring tape. Additionally, ensure you have a helper to assist you in handling the TV during the installation process.
The first step is to locate the wall studs using a stud finder. Once you’ve found the studs, mark their locations on the wall. Next, align the wall plate of the TV mount with the marked spots and use a level to ensure it’s straight. Proceed to drill pilot holes into the studs and securely attach the wall plate using the appropriate screws.
Now, it’s time to attach the TV bracket to the back of your television. Follow the manufacturer’s instructions and use the provided screws to ensure a secure attachment. Be cautious while handling the TV, as it can be heavy and fragile.
TV RepairWith the wall plate and TV bracket in place, it’s time to mount the TV on the wall. Enlist the help of your assistant to lift the TV and align the bracket with the wall plate. Carefully lower the TV onto the wall plate, ensuring that it locks securely into place. Double-check the stability and adjust as necessary.
To achieve a clean and organized look, it’s essential to properly manage the cables connected to your TV. Use cable management solutions such as cable clips, cable raceways, or in-wall cable concealment to hide and route the cables along the wall. This not only improves the aesthetics but also minimizes the risk of tripping hazards.
Once the TV is securely mounted and the cables are managed, take a moment to double-check the alignment and ensure that everything is functioning correctly. Use a level to confirm that the TV is perfectly straight. Test the TV and all connected devices to verify that they are working as intended.
Expertise and Experience: Professional installers have the knowledge and experience to handle various types of mounts, TV sizes, and wall materials. They can ensure a safe and secure installation while avoiding common pitfalls.
Time and Convenience: Installing a TV wall mount can be time-consuming, especially for those without prior experience. By hiring professionals, you save valuable time and can focus on enjoying your newly mounted TV.
Precision and Aesthetics: Professionals have the skills to achieve precise alignment and level mounting, resulting in an aesthetically pleasing installation. They can also provide advice on optimal TV placement for the best viewing experience.
Safety and Protection: TV wall mount installation involves handling heavy equipment and working at heights. Professional installers have the necessary tools and safety equipment to minimize risks and protect your TV and walls from damage.
If you just want to clear up some space and put your TV on the wall so that you don’t have to rely on furniture, a low profile mount will get the job done best. Low profile means the screen is close to the wall, almost like a painting.
In a room where the screen is visible from all angles, a stationary mount will suffice. But if the best solution for multiple viewing angles would be a full motion mount. You can also get a recessed mount which offers both full motion flexibility as well as the ultimate low profile.
Consider the lighting in your room–especially if there is sunlight coming through a window, you’ll want to make sure your TV mount gives you the flexibility to turn or angle your screen.
If you’re having a hard time deciding where to put your TV, a mobile mount can help you put it anywhere and everywhere you like! Try a mobile TV mount such as the Kanto MTM82PL which allows you to adjust the height of your screen as well as move it to another location entirely.
It is possible to mount your TV into other materials such as steel studs, but you may require special hardware to do so. If you’re planning to mount into steel studs or unsure of the material behind your wall, be sure to consult a professional.
Before you purchase any TV mounts, be sure to know how far apart your studs are spaced. It’s also important to be aware of any wires or pipes near where you’re mounting your TV if you plan to install a recessed mount.
When it comes to determining the compatibility between a TV mount and your TV screen, there are two main specifications you want to consider: the weight of your screen, and the VESA pattern.
Kanto TV mounts come with all the hardware to mount your TV such as screws, nuts, and bolts neatly laid out for you. There are some additional tools you’ll need:
Your PDX650 comes with an H frame that attaches to the back of your TV. First, attach the vertical arms to the back of your TV using the included screws that correspond to the VESA holes.
